IWI Tavor CTAR-21 Parts Kit (Pre-Order more on the way soon!)

MORE ON THE WAY SOON! I have another batch of kits coming in next week! Pre-orders open!

I'm expecting the same options to be available on the next batch as well! Thank you all who ordered from the first batch you all are amazing!

Thick Boi Nopel remix is here for those who are asking, print at your own risk: https://odysee.com/@tracksandarmaments:d/PAR-21-Re...

Note about options:

With the Semi-Auto conversion service, we will remove the auto sear from the trigger pack and convert it to semi-auto only and convert it in a way to fit semi auto receivers like the PAr-21, however you will still need to make sure final fitment is done to fit your receiver. We also modify the bolt carrier and remove the auto sear trip on the carrier, this will allow the carrier to fit a semi-auto receiver.

The kits have 15" barrels, even with the stock flash hider, the over all length of the gun is still less than 26". To avoid falling into NFA configuration, a flash hider/MB longer than 2.8" can be pinned and welded to the barrel. We have some KAK 2.9" flash hiders we can pin and weld for you. If you would like us to pin and weld your own device, you can chose that option and then send us your MB for installation.

If you want a turn-key non-NFA kit for an easy semi-auto build on a semi receiver, choose these options:

Convert kit to Semi-Auto

Pin & Weld flash hider (KAK).

Some kits have extra features, like handguard rails and IWI logos on the stock, if you want to be guaranteed one of these options you can choose it from the options list as well.

We also have some YHM-227A 1913 rails which can mount on the old Meprolight mount, that way you can mount a modern Meprolight, or any optic of your choice.

IWI TAVOR-21 5.56mm Parts Kit W/ Barrel CTAR-21

• Manufactured by Israeli Weapon Industries
• Made in Israel
• Genuine Israeli Military surplus
• Model CTAR-21 (Compact Tavor Assault Rifle)
• Shorted version of the original TAR-21
• Originally designated for Israeli Special Forces & Commandos b/c of its compact bullpup configuration
• Complete parts kit minus receiver & some hardware (small nuts & screws)
• Torch cut receivers
• 5.56x45mm NATO caliber 15" Cold Hammer Forged interchangeable chrome lined barrel is included (populated)
• Polymer bullpup stock/ chassis & handguard

The IWI CTAR-21 5.56mm Parts Kit is a genuine Israeli military surplus kit manufactured by Israeli Weapon Industries (IWI) in Israel. Originally issued for the Compact Tavor Assault Rifle (CTAR-21), a bullpup rifle developed for Israeli special forces and commando units, the kit includes a 15-inch cold hammer-forged, chrome-lined, interchangeable barrel chambered in 5.56×45mm NATO, along with the original polymer bullpup stock/chassis, handguard, and other major components. The kit is sold without the serialized receiver and may be missing some small hardware such as screws and nuts, while the included receiver sections have been torch cut in accordance with surplus demilitarization requirements. These kits typically show signs of military service but retain their original Israeli-made components and are valued by collectors and enthusiasts for their authenticity and quality.

NOTE: Prior to installing this length of barrel into a rifle a NFA Form 1 must be completed and returned approved.

A 15 Inch length barrel installed into a shoulder fired firearm is a "Short Barreled Rifle" under the NFA.