IWI Tavor TAR-21 Kit

Note about options:

With the Semi-Auto conversion service, we will remove the auto sear from the trigger pack and convert it to semi-auto only and convert it in a way to fit semi auto receivers like the PAr-21, however you will still need to make sure final fitment is done to fit your receiver. We also modify the bolt carrier and remove the auto sear trip on the carrier, this will allow the carrier to fit a semi-auto receiver.

The kits have 15" barrels, with the muzzle brake installed, the length comes out to 16.25". We can pin and weld the stock muzzle brake for a non-NFA style build. We can also pin and weld your own muzzle brake if you want a specific one that you can use with your suppressor etc. NOTE: Your muzzle brake needs to be 2" or longer OAL in order to allow the barrel to be longer than 16".

If you want a turn-key non-NFA kit for an easy semi-auto build on a semi receiver, choose these options:

Convert kit to Semi-Auto

Pin & Weld Muzzle brake.

IWI TAVOR-21 5.56mm Parts Kit W/ Barrel CTAR-21

• Manufactured by Israeli Weapon Industries
• Made in Israel
• Genuine Israeli Military surplus
• Model CTAR-21 (Compact Tavor Assault Rifle)
• Originally designated for Israeli Special Forces & Commandos b/c of its compact bullpup configuration
• Complete parts kit minus receiver & some hardware (small nuts & screws)
• Torch cut receivers
• 5.56x45mm NATO caliber 15" Cold Hammer Forged interchangeable chrome lined barrel is included (populated)
• Polymer bullpup stock/ chassis & handguard

The IWI CTAR-21 5.56mm Parts Kit is a genuine Israeli military surplus kit manufactured by Israeli Weapon Industries (IWI) in Israel. Originally issued for the Compact Tavor Assault Rifle (CTAR-21), a bullpup rifle developed for Israeli special forces and commando units, the kit includes a 15-inch cold hammer-forged, chrome-lined, interchangeable barrel chambered in 5.56×45mm NATO, along with the original polymer bullpup stock/chassis, handguard, and other major components. The kit is sold without the serialized receiver and may be missing some small hardware such as screws and nuts, while the included receiver sections have been torch cut in accordance with surplus demilitarization requirements. These kits typically show signs of military service but retain their original Israeli-made components and are valued by collectors and enthusiasts for their authenticity and quality.

NOTE: Prior to installing this length of barrel into a rifle a NFA Form 1 must be completed and returned approved.

A 15 Inch length barrel installed into a shoulder fired firearm is a "Short Barreled Rifle" under the NFA.